Is the main US Army Corps, was the production of the disarmament process went through several modifications and ended production (m16a1) rubber (5.56 × 45), was sent this weapon to South Vietnam in 1961 with a view to his experience, the American ground forces, and has applied for (104000) gun of this kind.
In early 1980, they have some modifications to the gun and called (m16a2).
The evolution of the initial design for (m16) to multiple designs, and brings the total of these designs to more than fifty designs including (Parabellum) rubber-9 × 19 mm.
US armed forces and are used for more than sixty different types of state (m16).
Arms specifications (m16a1):
Length of the arms
990 mm
Weight
2.8 kg
Length of the barrel
508 mm
Lhalzna
Four lines to the right
The speed of the bullet
643 m / s
Buffer overflow
20-30 - 40-60 shot
Can be installed in an optical device for the following correction or a day on the arms, and can be mounted grenade launcher (40 mm) on this gun and then called (m203) and this picture of him:
Arms specifications (m16a2):
Length of the arms
1006 mm
The weapon's weight
3.5 kg
Length of the barrel
508 mm
Lhalzna
6 lines
Flinging theoretical
600-900 rounds per minute
Practical chucking
150-200 i / d) to (f 45-65t / d (Individual)
Internal and external parts of the weapon:
1. scattered flame.
2. barrel.
3. Filament base.
4. Base for the installation of the harpoon.
5. gas pipe.
6. protection under the hand and prevent gas pipe (plastic condom).
7. under the jaw and installation.
8. exit hole cover the empty envelope.
9. Pods sections and set the shutter.
10. base for the installation of the telescope and place the ordinance.
11. drawer sections.
12. protective heat (plastic condom).
13. Gas pipe.
14. breech.
15. Sections group.
16. Protective Hand (plastic condom).
17. store.
18. Trigger.
19. Almsdsah fist.
20. Hammer.
21. crosshead.
22. The return spring and Delilah.
23. visor trigger.
Jaw and installation:
1. your process safety measure, such as a Kalashnikov steps perfectly, nor tolerate this at all, knowing that the drawer sections Almsdsah be above the top of the grip and pulls back.
2. Click on the connecting link between the visor and the body of the weapon barrel down, and move the left part of the handle forward and then move the left pane of the handle forward, too.
3. Now nail installation Push in the left Psych or nail or head shot toward the right, without the screw comes out of the body of the weapon.
4. Lift the upper part of the arms to the top.
5. Drag the sections set by the drawer sections after pressing the limitation.
6. Remove the sections range from Hull arms and then I follow Bassahab sections after lowered slightly down on its own and then pull the place.
7. Push the needle set back a little bit.
8. Lower the nail install the needle to the left to be directed by the needle.
9. Pull the needle set and turn your nail at an angle of rotation of the shutter (90) and then lift the shutter.
10. Click on under the nail.
11. Push the needle group forward to be separated from the rest of the group sections.
12. Move the nail installation front from left to right Psych or nail.
13. Unplug all mesh belt on the crosshead to separate trigger group and the crosshead for the plastic hull weapon.
14. Click on the return spring back a little, and move his registration in order to rush you off.
Mechanical movement:
1. When the drawer pull back sections that will lead to the stability of the hammer in the back when it's better to be returned to the place of the drawer.
2. During the retreat will rise Forums shot by pulsed store at the same time be pulsed Forums Mndgueta inside the crosshead.
3. When The sections by beating Almndguet, will take one of protrusions shutter shot Talghemha room for the explosion, and becomes the needle in front of the capsule.
4. When the explosion hit the breech chamber remains Forums pay forward revolves around (15) and falls within the range sections leading to the sealing.
5. When you press the trigger liberated hammer to hit the capsule shot leading to ignite gunpowder starts with the projectile toward the goal.
6. During the passage of the projectile Basbtanh and when it is close to the ratio of the nozzle of the gas back through the gas pipe made of (metal stainless steel) and bang sections set, leading to her return back.
7. back down the shutter holder to the back, going shutter unlike the previous trend (15) Fanevk sealing.
8. The back sections set back beating and pulsating with the empty envelope.
9. presence nail down the existing pressure on the heel of the left Valfezha shot from the right side when it reaches the exit hole envelope empty.
10. Then sections continue to decline to comply with the hammer by the selection panel chucking (up to - individually).
_returns_to_the_General_Dynamics_Electric_Boat_shipyard.jpg)
0 التعليقات:
إرسال تعليق